Compass Honeywell HMR3000&KVH C100, china Compass Honeywell HMR3000&KVH C100 manufacturer, Compass Honeywell HMR3000&KVH C100 wholesale center

Digital Compass Module

HMR3000



Lectronic compass module that

Provides heading, pitch and roll

Output for navigation and guidance

Systems.Honeywell's

Solid state magnetoresistive

Sensors make this strapdown

Compass both rugged and reliable.

This compass provides

Fast response time up to 20

Hertz and high heading accuracy

Of 0.5 with 0.1 resolution.



APPLICATIONS

Oceanographic

-Marine Compassing

- Positioning of Buoys,

Underwater Structures

Drilling

-Down Hole and Directional

Attitude Reference

Heading

- Navigation of Unmanned

Vehicles

- Avionic Compassing

Integration with GPS

- Dead Reckoning

Satellite Antenna Positioning

Laser Range Finders

-Surveying Applications



FEATURES AND BENEFITS

Fast Response Time Built with solid state magnetic sensors and no moving parts improves



Response time, allowing faster updates compared to gimballed fluxgates.

Small Size Available as a circuit board 1.2 x 2.95 inches, weighing less than one



Ounce, or in an aluminum enclosure.

Low Power Operates with less than 35 mA, allowing for long operation with a battery.

High Accuracy Accuracy better than 0.5 with 0.1 resolution for critical positioning



Applications.

Wide Tilt Range Tilt range of +/-40 for both the roll and pitch allows operation for most Applications.



Hard Iron Compensation Calibration routines to compensate for distortion due to nearby ferrous Objects and stray fields, such as vehicles.

User Configurable Features User settings of baud rate, update rate, output format, units, Filter settings, deviation angles, alarms and warnings are stored internally in non-volitile memory.





KVH C100

KVH's C100 Compass Engine is an innovative stand-alone design offering small size, low cost, and system flexibility to meet your demanding heading sensor applications.



Physical

Dimensions 114 mm(l) x 46 mm(w) x 28 mm(h)

(4.5" x 1.8" x 1.1")

Weight 64 grams (2.25 oz.) -with SE-25 coil

Input Voltage +8 to +18VDC or +18 to +28VDC

(user selectable)

Current Drain 40 mA DC;Maximum

Optional Aluminum Housing1

Dimensions 80 mm(l) x 75 mm(w) x 57 mm(h)

(3.15" x 2.95" x 2.25")

Weight 400 grams (14 oz.) excluding cable



Performance

Accuracy2 +/-0.5 or +/-10 mils RMS (SE-25coil assembly and digital outputs)

Repeatability +/-0.2 or +/-5 mils (SE-25 coil assembly and digital outputs)

Resolution 0.1 or 1 mil

Dip Angle +/-80 (maintains stated accuracy after auto-compensation up to +/-80

Magnetic dip angle)

Tilt Angle2 +/-16;Dev.= +/-0.3 RMS (SE-25)

+/-45;Dev.= +/-0.5 RMS (SE-10)

Declination/Variation +/-180.0 adjustment range (offset)

(user selectable)

Index Error Correction +/-180.0 adjustment range (offset)

(user selectable)

Response Time 0.1 to 24 seconds (user selectable)

Environmental

Operating Temp -40C to +65 C (-40 F to +150 F)

Storage Temp -57C to +71 C (-71 F to +160 F)

Shock/Vibration Designed to meet MIL-STD-810

Shock and vibration requirements

Altitude Designed to meet 12, 192 meters

(40, 000 ft.) MSL (operating/non

Operating)

Reliability MTBF calculated to >30, 000 hours

1(SE-25 coil option only)

2Accuracy measurements apply to a level compass module after compensation in a free magnetic field.



After installation and auto-compensation, typical accuracies of +/-0.5 are achievable on most platforms.