LED Hand pressing Flashlight, china LED Hand pressing Flashlight manufacturer, LED Hand pressing Flashlight wholesale center

Product feature: 1. Pressing for power generation 2. Convenient to use, never need change battery, pressing to recharge 3. High brightness: The Max.brightness can reach 32000MCD 4. Have time display. 5. the red LED can flash give an alarm, Highest brightness: ?3000MCD, 6. It has long life-span. 7. Unique design, lightweight size. 8. Wrap strap design, convenient to carry Main Technical Parameters 1. lighting A. 2LEDs Max Brightness: 32000mcd, B. Pressing 1 minute at the speed of 2 times per second can provide 4 minutes lighting time of 2 white LEDs or 10 minutes of red LED. 2. Using life Switch life: 10000 times LED life time: 100000 hours Plastic body: 5 years The whole unit: 5 years 3.Pull: the wrap strap can withstand no more than 5kgs pulling force Use method: 1. lighting (1) Release the hand crank by sliding the rear switch to the back position; hold the main body and pressing the handle at the speed of 3 times per second for power generation (2) Push the switch forward, 2 white LEDs lighting; push the switch medially, 2 white LEDs off; push the switch back, the red LEDs will lighting; then push the switch medially, the red LEDs off (3) Squeeze the hand crank down, slide the rear switch to the front position to lock the hand crank. 2. electronic watch use method Press the key "S" of electronic watch, it will show the date Push the key "S" more than 3 seconds, the electronic watch will replace, push the key "M" can settling the date and time Notice 1. Medium squeeze, too hard may reduce the lifespan of the product. 2. Usually squeeze to charge it for longer long lifespan. (No less than 1 minute every time). 3. Do not place the unit in high-temperature or high humidity place. 4. The product is not waterproof; do not drop it into water.