FM Transmitter Model, china FM Transmitter Model manufacturer, FM Transmitter Model wholesale center

Specifications:

1) Frequency response:20Hz - 20kHz

2) Separation: >= 50dB

3) Operating current:50mA

4) Stand-by current:90uA5) Transmission range:106.7~107.9MHz (interval 0.1MHz)

6) Power source:2 AAA batteries or the car's power source

7) Connecting cord length:190mm

8) Dimensions (D x W x H):84 x 48 x 22mm

9) Weight:63g (batteries excluded)

10) Accessory:1 car charger



Features:

1) High fidelity stereo: This device can modulate the audio frequency signal of CD, MD, MP3, MP4, PDA, Notebook, and PC to FM signal (106.7~107.9MHz ); With the stereo tune you can enjoy listening high quality music anywhere

2) Digital PLL: With digital PLL, wave signal transmission and reception will not be affected even in places subject to extreme change in temperature; in addition, using the digital tune can avoid the fussy frequency modulation

3) Powered by batteries or the car's power source4) Full frequency range design can effectively avoid interruption



Operation instruction:

1) Install the batteries (2 AAA batteries) or connect to the car's power source

2) Plug the FM Transmitter into the audio device's output port

3) Adjust the volume and frequency of the FM radio (avoid the transmission points of the broadcasting stations)

4) Press the power button of the FM transmitter, tune the transmission frequency according to the reception frequency of the FM radio (if the FM signal is interrupted, please set the frequency of the FM transmitter and the FM tuner to the other frequency)5) Press M1/M2/M3/M4 button for a few seconds until M1/M2/M3/M4 is shown on the LCD, so that you can save the transmission frequency (make sure the batteries have power)

6) The FM transmitter will automatically shut down after 2 minutes if no