Instant PVC Card Material (P1 001), china Instant PVC Card Material (P1 001) manufacturer, Instant PVC Card Material (P1 001) wholesale center

Instant PVC Card:

Printing method: Inkjet printer (Epson R210 or R230 is recommended)

Laminating type: Pouch laminating

Color: White, Golden or Silver



Thickness:

1. Two printable PVC sheet, each one is 0.15mm Core sheet 0.46mm

2. Two printable PVC sheet each one is 0.28mm Core sheet 0.20mm

Size: 200x300mm or as per your requirement, or in roll type

This is a new technology for making cards. No need any bulk equipment or professional operation. Only one inkjet printer, heat laminator, trimmer can make it. Just take few minutes to make 10cards.



Advantage:

1. No need any professional equipments

2. Vivid color and high resolution photo quality

3. High glossy, water resistant with tight and smooth edge PVC card

4. Quick, easy, customized and professional to make PVC card. Low investment, high profit.



Apply to: VIP card, IC card, student's identity card, magnetic card, etc.

Also other fields, like: Bridal veil photographic, key tablet, etc, there is no limit size for our Instant PVC card.

Color: White, gold, silver

Size: 200*300MM/sheet

Thickness: 0.66mm, 0.76mm, 0.96mm

Package: 50sets/bag (3sheets/set)



Steps:

1. Design in computer, you may use CorelDraw, Photoshop, Illustrator, Freehand, etc. Software to make design in your computer.

2. Put the blank printable overlay/film into the inkjet printer (Epson R210 is recommended), reverse-print (Note: When you put the printable overlay/film into the inkjet printer, please put right side for print, DON'T PUT WRONG SIDE! ) You may print two films, one as front side of the card, one as backside.

3. After printing, let the printed film dry around 5-10 minutes, then, remove the protection film from the both sides of the core PVC sheet, put one printed film on one side of the PVC sheet and put the other printed film onto the other side of the PVC sheet, then, put them all into the pouch laminator for lamination. You may set the temperature at 130-140C, to get a better laminating result, you may laminate twice.

4. After laminating, use a cutter to cut the laminated sheet into two half sheets (two pieces of sheet with Size of 100x300mm)

5. Put the sheet into manual puncher for punching

6. After punching, you will get final cards.