LED Multi Functional Flashlight (SB 3083), china LED Multi Functional Flashlight (SB 3083) manufacturer, LED Multi Functional Flashlight (SB 3083) wholesale center

Working Principle:

This product is made up of headlight and taillight. It can be installed on the bicycle as a bicycle light and warning.

1. The headlight can be used as dynamo flashlight also. It is made up of chargeable battery, generator, charging and lighting system. Cranking the handle by hand, changing speed by professional designed driving gear which can drive the three-phase brushless generator to generate alternating current. Then changing the alternating current into DC through commutating and voltagestabilizing which to charge its inside NI-MH battery, so as to achieve energy converting and accumulating. It can also charge mobilephone through connecting wire. The switch makes its lighting and flashing functions come true.

2. Headlight and taillight can be used together, insert the headlight to the holder, slide the switch to realize the function of headlight and taillight lighting and flashing. All these make you safe and convenient to ride a bicycle at night



Functions:

1. Use as bicycle light, warning.

2. Cranking for power generating and accumulating in high-efficiency.

3. High-luminance lighting.

4. Charging other digital things to meet an emergency.



Features

1. Use as bicycle light for lighting and flashing warning. Headlight lights in high Intensity, taillight flash in red for warning. Make you safe and convenient to ride a bicycle at night.

2. Cranking to recharge, no external batteries needed, rechargeable power-storage, Green power, environmentally friendly, Economical and safe ( No need to worry about battery leak. )

To use, recycle power.

3. Professional ergonomic design, brushless generator used. Perfect combination of the light weight and high efficiency. Low noise and long lifespan.

4. Unique spotlight system, good for short and middle range distance lighting.

5. High-efficiency emergency charger ( When your cell phone and other digital products run out of power, you can use it to charge them )

6. Convenient to use as a bicycle light or a dynamo torch, exqusite sculpt.



Main Technical Parameter:

Max. Luminous flux e 9 Lm

Max. Brightness e110000 Mcd

Lighting distancee10 meters

Irradiation angle About 9 degree

The time that headlight lights after 1 minute crankinge18 minutes

The time that headlight and taillight light simultaneously after 1 minute crankinge7 minutes

The time that headlight flashes after 1 minute crankinge4 hours

The time that headlight and taillight flash simultaneously after 1 minute crankinge60 minutes

The time that headlight and taillight light simultanuously after being charged fullye50 minutes

Flashing frequency About 1.5 Hz

Waterproof degree IPX 52

Charge for external things:

Voltage output 5.6 V

Max. Power outpute2.5 W

Talking time after 3 minutes charging 2-8 minutes

Main parts life-span:

LED lifetimee50000 hours

Switch lifetimee5000 times

The whole unit lifetimee5 years

Plastic part lifetimee5 year

Size and Weight:

Headlight size About 91*43*39mm

Taillight size About 51*47*37mm

Headlight weight About 93g

Other weight About 92g

Others:

The built-in battery specification 80 mAh, 3.6V

Length of the wire connecting headlight and taillight About 1200mm



Operation Method:

A: Use as bicycle light

1. Headlight Holder Installation: Release (counterclockwise) the spanner of the headlight holder, fold the fastener, clip the fastener on the proper position of the kickstand, screw the spanner to fasten it. Note: There are two gaskets inside the fastener, you can use one according to your needs.

2. Taillight installation:

A: Fix the taillight holder on proper position under the bicycle by using the rubber rings ( There are two rubber rings. A bigger one and a small one, you can adjust the rings to fix the holder according to your needs )

B: Insert the taillight to the holder, fix the connecting cable on your bicycle properly.